Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob stopped working for a while, it could be due to a dead battery in the coin or water damage and receiver module issues or a malfunctioning electronic chip. Luckily, all of these are easy to fix and you'll have your vehicle back to normal in no time!
The key blade can become worn out and lead to a malfunctioning car key. It is easy to fix this problem by visiting your local Car Key Man Auto Locksmith to have a new blade fitted.
Battery
The key fob inside your Peugeot 308 may die or become weak enough to not send a strong signal. The key fob could cease to function and stop you from locking or unlocking your doors, or even starting your engine. To fix this issue, you'll need to replace the battery in your key fob.
You can purchase a new battery at an auto parts store, or at your local hardware store. Make sure that the battery is brand new and not sat on the counter for too long. A brand new battery is more capacity and will send a stronger signal your car.
After replacing the battery try unlocking the doors and locking them using the key fob. If the doors don't unlock, the problem is likely in the car's receiver module that can be reset by your local Peugeot dealer.
The chip inside the key fob could also be damaged. You can cause damage to your key fob if you drop it on the ground, or expose it to water. Rubber seals that shield your chip from moisture may wear out over time. This is especially true if you expose your key fob to water for prolonged periods of time, for example, submerging it in the ocean. To avoid this from happening, you must keep your key fob free from moisture and never let it come in contact with water.
Water Damage
Don't lose hope on your key fob when it gets wet, whether you slipped into the pool or slipped into a pool. The key fob is protected by rubber seals but prolonged exposure to water could cause damage to its electronic chip. Water is a great conductor and any water that is absorbed into the key fob will cause a series short circuits that eventually destroy the electronic chip. After removing the battery, clean its contacts with isopropyl alcohol and dry it completely before putting it back into.
Your Peugeot 308 may not start because of the battery being dead. If you have an extra vehicle, jumper cables may be used to get the engine running again. If the battery is damaged, it must be replaced.
new key for peugeot 207 g28carkeys.co.uk is a malfunctioning receiver in the vehicle, which may hinder it from receiving a signal from the key fob. It could be a issue with the antenna or wiring or the key fob may be damaged. If you're using a new key fob it may require to be programmed into the vehicle. If you're unable to solve the issue, contact an expert technician. A technician trained in the field will be able determine the issue quickly and then fix it right away.
Radio Interference
Symptoms such as key fob not being recognized or with a limited range often mean that there is a problem with the system. It could be radiated or conducted, with the former resultant from power supply cables or speaker wiring passing too close to electrical components. Generally speaking, rerouting cables or moving them further away from these components can solve the issue.
It's unlikely that someone is monitoring the key fob's signals to steal your car, however it's possible that your signal has been masked by radio frequency interference. Luckily, this is a simple issue to fix.
If your key fob isn't being recognized by the system, you can try replacing the battery. Make sure that the battery is of the correct size and type. Batteries that are not the right size could damage your battery.
Certain alarm systems from the aftermarket and radar detectors operate on the same radio frequency as your key fob and they can cause them to interfere with your key signals. It is advised to avoid attaching these devices to your key fob.
Pairing Issues
A car's remote keyless entry system is an antenna that receives radio frequency signals from the key fob. If the receiver is experiencing issues, you will not be in a position to start your car regardless of whether the key fob works and can be changed. The issue could be caused by a number of factors, including an inoperative coin battery or water damage. The receiver may also be malfunctioning because of a software bug or internal damage in the key.
The battery for your coin in your Peugeot 308 keyfob has likely failed. The battery can be easily replaced, but ensure that it's the correct battery for your key fob. It is best to choose one that is the same size, voltage, and specification as the original.
Your Peugeot 308 keyfob may not work if it is connected to another vehicle. This can happen if you have given your key fob to someone else or it has been used to unlock and begin other vehicles. This can be solved by reprogramming your key fob using an OBDII scan. The tool will ask you for information about your vehicle, like its VIN or engine type. It is vital to enter the correct details.